Advanced Wireless Settings - D-Link DIR-600 User Manual

Section 3 - Coniguration
Set the transmit power of the antennas.
Beacon Period:
Beacons are packets sent by an Access Point to synchronize
a wireless network. Specify a value. 100 is the default setting
and is recommended.
RTS Threshold:
This value should remain at its default setting of 2346.
If inconsistent data low is a problem, only a minor
modiication should be made.
Fragmentation
The fragmentation threshold, which is speciied in bytes,
Threshold:
determines whether packets will be fragmented. Packets
exceeding the 2346 byte setting will be fragmented
before transmission. 2346 is the default setting.
DTIM Interval:
(Delivery Trafic Indication Message) 3 is the default
setting. A DTIM is a countdown informing clients of the
next window for listening to broadcast and multicast
messages.
Short GI:
Check this box to reduce the guard interval time therefore
increasing the data capacity. However, it's less reliable
and may create higher data loss.
D-Link DIR-600 User Manual

Advanced Wireless Settings

32