Advanced Wireless Settings; Rts Threshold; Dtim Interval; Wmm Function - D-Link DIR-685 Xtreme N User Manual

Secton  - Configuraton
Transmit Power:
Set the transmit power of the antennas.
Beacon Interval:
Beacons are packets sent by an Access Point
to synchronize a wireless network. Specify a
value. The default and recommended setting
is 100.

RTS Threshold:

This value should remain at its default setting
of 2346. If inconsistent data flow is a problem,
only a minor modification should be made.
Fragmentation:
The fragmentation threshold, which is specified
in bytes, determines whether packets will be
fragmented. Packets exceeding the 2346 byte
setting will be fragmented before transmission.
The default setting is 2346.

DTIM Interval:

A DTIM (Delivery Traffic Indication Message)
is a countdown informing clients of the next window for listening to broadcast and multicast messages. The default setting
is 1.
Preamble Type:
Select Short or Long Preamble.
CTS Mode:
Select None to disable this feature. Select Always to force the router to require each wireless device on the network to
perform and RTS/CTS handshake before they are allowed to transmit data. Select Auto to allow the router to decide when
RTS/CTS handshakes are necessary.
D-Lnk DIR-685 User Manual

Advanced Wireless Settings