LG DRD-8080B Owner's Manual page 7

3. Insert the DVD-ROM drive unit into a free 5.25-inch drive bay. Secure the
DVD-ROM drive to the drive bay rails with the mounting screws (supplied).
4. Connect the 4-pin power cable and 40-pin IDE interface cable to the back of the
DVD-ROM drive.
Audio Cable
Notes: If there is no spare power cable available in the computer, you will have to
purchase a splitter cable of a suitable type.
The red edge of the IDE cable corresponds to pin 1 of the IDE interface on the
DVD-ROM drive.
Please Note: an IDE cable is not supplied and may need to be purchased
separately.
If the computer is using a sound card, the drive is connected to the sound card with
an audio cable. This DVD-ROM drive is supplied with a Creative Labs
SoundBlaster© compatible audio lead, if this is not suitable for your sound card, it
maybe necessary for you to purchase a suitable lead from your retailer. Refer to the
manual for the sound card for detailed information regarding connection.
5. When the installation of the drive unit is complete, replace the computer cover.
6. Reconnect the computer power cord and turn on the computer.
IDE cable
E-7
Power Cable
Red Strip