Download Print this page

Alarms; Countdown Timer - Casio 3427 Operation Manual

Casio 3427 watch operation guide

Advertisement

Operation Guide 3427
To change your Home Time city to the current World Time city
1. In the World Time Mode, use D to display the city you want to make your new
Home Time city.
2. Press A and B at the same time.
This makes the World Time city you selected in step 1 your new Home Time city.
E-20
To set an alarm time
1. In the Alarm Mode, use D to scroll through the alarm
screens until the alarm number you want to set is
displayed.
D
2. After you select an alarm, hold down A until the hour setting of the alarm time
starts to fl ash, which indicates the setting screen.
This operation turns on the One-time Alarm automatically.
E-22
Alarm Operation
The alarm tone sounds at the preset time for 20 seconds, regardless of the mode the
watch is in.
Alarm and Hourly Time Signal operations are performed in accordance with the
Home City Time (T-1).
To stop the alarm tone after it starts to sound, press any button.
To test the alarm
In the Alarm Mode, hold down D to sound the alarm.
E-24
To turn the Hourly Time Signal on and off
1. In the Alarm Mode, use D to select the Hourly Time
Hourly time signal on
Signal.
indicator
2. Press A to toggle it on and off.
The Hourly Time Signal on indicator is shown on the
display in all modes while this function is turned on.
E-26
To confi gure the countdown timer
1. While the countdown start time is on the display in the
Countdown Timer Mode, hold down A until the current
countdown start time starts to fl ash, which indicates the
setting screen.
If the countdown start time is not displayed, use the
procedure under "To use the countdown timer" (page
E-29) to display it.
2. Press C to move the fl ashing in the sequence shown
below to select other settings.
Hours
3. When the setting you want to change is fl ashing, use D (+) and B (–) to change
the fl ashing item.
To specify a countdown start time of 24 hours, set
4. Press A to exit the setting screen.
E-28
D
D
D
D
D
C
C
Minutes
Seconds
C
.

Alarms

Your watch has a total of fi ve alarms, each of which you
Alarm on indicator
can confi gure as a daily alarm or one-time alarm.
Daily Alarm: Sounds at the preset time each day.
One-time Alarm: Sounds once at the preset time and then
is disabled automatically.
You can also turn on an Hourly Time Signal that causes
the watch to beep twice every hour on the hour.
All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing C (page E-7).
Alarms operate in coordination with the current Home
City Time.
Alarm number
Alarm time
(Hour : Minutes)
3. Press C to move the fl ashing in the sequence shown below to select other
settings.
Hour
C
One-time Alarm/Daily Alarm Selection
4. While a setting is fl ashing, use D and B to change it as described below.
Screen
To do this:
Do this:
Use D (+) and B (–).
Change the hour and
minutes.
With the 12-hour format, set the time correctly
as a.m. or p.m. (P indicator).
Press D.
Toggle between One-
/
time Alarm and Daily
One-time Alarm on:
Alarm.
Daily Alarm on:
5. Press A to exit the setting screen.
To turn an alarm on and off
1. In the Alarm Mode, use D to select an alarm.
2. Press A to cycle through the alarm settings as shown below.
A
Alarm Off
One-Time Alarm
On
A
In all modes, the alarm on indicator is shown for the alarm that is currently turned
on.
The alarm on indicator fl ashes while the alarm is sounding.

Countdown Timer

The countdown timer can be set within a range of one
1/10 second
second to 24 hours. An alarm sounds when the countdown
reaches zero.
All of the operations in this section are performed in the
Countdown Timer Mode, which you enter by pressing C
(page E-7).
Hours
Minutes
Seconds
To use the countdown timer
Press D while in the Countdown Timer Mode to start the
countdown timer.
When the end of the countdown is reached, the alarm
sounds for ten seconds or until you stop it by pressing
any button. The countdown time is reset to its starting
value automatically when the alarm sounds.
Press D while a countdown operation is in progress to
pause it. Press D again to resume the countdown.
To stop a countdown operation completely, fi rst pause
it (by pressing D), and then press A. This returns the
countdown time to its starting value.
E-21
C
Minutes
C
E-23
A
Daily Alarm On
E-25
E-27
E-29

Hide quick links:

Advertisement

loading

This manual is also suitable for:

3434