Asus Z97-WS User Manual page 98

Power Fast Ramp Response [Auto]
This item allows you to enhance the response of the CPU voltage regulator during the
load transients. Use the <+> or <-> to adjust the value. The values range from 0.00 to
1.50.
Configuration options: [Auto] [0.00] - [1.50]
CPU Internal Power Saving Control
Power Saving Level 1 Threshold [Auto]
Lower value provides sufficient overclocking tolerance to enlarge the overclocking
potential. Higher value provides better power-saving condition.Use <+> or <-> key to
adjust the value. The values range from 0 A to 80 A at 1 A increment.
Power Saving Level 2 Threshold [Auto]
Lower value provides sufficient overclocking tolerance to enlarge the overclocking
potential. Higher value provides better power-saving condition.Use <+> or <-> key to
adjust the value. The values range from 0 A to 50 A at 1 A increment.
Power Saving Level 3 Threshold [Auto]
Lower value provides sufficient overclocking tolerance to enlarge the overclocking
potential. Higher value provides better power-saving condition.Use <+> or <-> key to
adjust the value. The values range from 0 A to 30 A at 1A increment.
Extreme Over-voltage
This item allows you to set higher voltages for overclocking. When you enable this item, you
can choose a high level voltage to overclock, but does not guarantee the CPU life.
You can only enable this item when the onboard OC_CPU jumper is set to ON. Refer to
section 1.2.7 Jumpers of this user guide for more details.
CPU Core Voltage
This item allows you to configure the amount of voltage fed to the CPU cores. Increase the
voltage when setting a high Core Frequency value.
Configuration options: [Auto] [Manual Mode] [Offset Mode] [Adaptive Mode]
The following item appears only when you set the CPU Core Voltage to [Manual].
CPU Core Voltage Override [Auto]
This item allows you to set the CPU Core Voltage override. Use the <+> or <-> keys to
adjust the value, The values range from 0.001V to 1.920 V with a 0.001 V interval.
The following items appear only when you set the CPU Core Voltage to [Offset Mode].
Offset Mode Sign [+]
[+]
[–]
3-26
To offset the voltage by a positive value.
To offset the voltage by a negative value.
Chapter 3: BIOS setup