Installation
4. Lift the camera bracket up and off from the camera base. (Figure 1.3)
5. Disconnect the cables from the connectors at the base of the camera.
6. Place the cable into the new hole and reconnect the cables to the
cable connectors at the base of the camera. (Figure 1.4)
7. Replace the chrome plug and tighten it into place.
8. Replace the chrome nut and tighten it into place
B. Replace the dome enclosure over the IP camera and tighten the 4 screws.
Safety Notice:
Installation and servicing should be done by certified technicians so as to
conform to all local codes and prevent voiding your warranty.
D-Link DCS-6511 User Manual
Figure 1.3
9