Camera Enclosure Disassembly And Sd Card Installation - D-Link DCS-6511 User Manual

Installation

Camera Enclosure Disassembly and SD Card Installation

Disassemble the Camera
Open the camera enclosure by removing the 3 standard screws using a screwdriver.
Remove the 4th screw using the provided security wrench.
Lift the dome off of the base of the camera.
Install the SD Card
Push the SD card into the camera with the gold contacts oriented towards the base of
the camera. To eject the SD card, push the SD card into the slot.
D-Link DCS-6511 User Manual
Figure A.
Figure B.
6