Secton - Configuraton
The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you
can configure inbound data filtering rules that control data based on an IP address range. Inbound Filters can be used
with Virtual Server, Port Forwarding, or Remote Administration features.
Name:
Enter a name for the inbound filter rule.
Action:
Select Allow or Deny.
Enable:
Check to enable rule.
Remote IP Start:
Enter the starting IP address. Enter 0.0.0.0
if you do not want to specify an IP range.
Remote IP End:
Enter the ending IP address. Enter
255.255.255.255 if you do not want to
specify and IP range.
Add:
Click the Add button to apply your settings.
You must click Save.Settings at the top to
save the settings.
Inbound Filter
This section will list any rules that are created.
Rules List:
You may click the Edit icon to change the
settings or enable/disable the rule, or click
the Delete icon to remove the rule.
D-Lnk DIR-825 User Manual
Inbound Filters