How To Load Your Dishwasher; How To Load The Top Rack - Hotpoint HDA750 Use And Care Manual

HOW TO LOAD YOUR DISHWASHER

This is a random mixed load, the most common type
Make sure dishes are properly loaded to insure that
water can reach the soiled surfaces. The wash arm
in the bottom sprays water up. The tower that rises
in the center sends water out over the dishes to wash
the items in the upper rack. A spray arm in the top
washes down also. Make sure to place tall items to
the outside so the upper wash arm is not blocked.

HOW TO LOAD THE TOP RACK

Below is the special upper rack that comes with this
model.
WATCH OUT FOR THIS.
The wash tower rises through the center of the bottom
rack during the wash and rinse portions of the cycle.
Don't block it or load tall things next to it. Also, be
careful not to let a portion of an item such as a uot or
dish handle extend-through the bottom rack. This could
block the wash arm and cause poor washing results.
The top rack is best for glasses, cups and saucers. Cups
and utensils can be washed when using the folding shelf.
Load the bottom row first, then fold down the shelf and
load the top row. Cups and glasses fit best along the
sides. This is the place for dishwasher-safe plastics, too.
Make sure small plastic items are lodged in tightly so
they can't fall onto Calrod@ heating element. Arrange
stemware so that it cannot move easily. Don't let the
glasses touch each other.
Sauce pans, mixing bowls and other small items may
be placed—face down—in the top rack, The top rack
is handy for all kinds of odd shapes. Be sure the force
of water and detergent can reach soiled surfaces.