Dial Cycles - Hotpoint HDA3400 Owner's Manual

About the dial cycles.
Rinse Only
HOT PREWASH OPTION
For rinsing partial loads that will be washed later. Do not use detergent.
1
DELAY
2 START
HOURS
3
4
5
SHORT WASH
OFF
PLATE WARMER
(HEATED DRY ON)
RINSE ONLY
(HEATED DRY OFF)
Delayed Start
The HOURS DELAY will allow you to delay the start time of any cycle not on the Dial automatically
HOT PREWASH OPTION
1
DELAY
2 START
HOURS
3
for up to 6 hours.
4
5
SHORT WASH
OFF
PLATE WARMER
(HEATED DRY ON)
RINSE ONLY
(HEATED DRY OFF)
Plate Warmer
For warming clean dishes and serving plates. This cycle will take approximately 32 minutes.
HOT PREWASH OPTION
1
DELAY
2 START
HOURS
3
4
5
SHORT WASH
OFF
PLATE WARMER
(HEATED DRY ON)
RINSE ONLY
(HEATED DRY OFF)
Heavy, Normal or Water Saver
HOT
PREWASH
HEAVY WASH
OPTION
NORMAL WASH
WATER SAVER
OFF
DRYING
RINSE ONLY
(HEATED DRY OFF)
Short Wash
For quickly washing loads of everyday dishes with medium soils that have not dried on.
HOT PREWASH OPTION
1
DELAY
2 START
HOURS
3
4
5
SHORT WASH
OFF
PLATE WARMER
(HEATED DRY ON)
RINSE ONLY
(HEATED DRY OFF)
6
Make sure ENERGY SAVER / HEATED DRY OFF is selected.
1
Be sure the door is unlatched.
2
Slowly turn the Dial to RINSE ONLY.
3
4 Latch the door to start the cycle.
Be sure the door is unlatched.
1
Select the wash cycle and option you want.
2
Slowly turn the Dial to desired time. The DELAYED START light will come on.
3
4 Latch the door to start the cycle.
Load clean dishware to be warmed.
1
Select HEATED DRY / HEATED DRY ON.
2
3 Be sure the door is unlatched.
Slowly turn the Dial to PLATE WARMER.
4
Latch the door to start the cycle.
5
1 Be sure the door is unlatched.
2 Slowly turn the Dial to the cycle you want. Don't turn it past this position, or you could
accidentally miss a rinse.
3 Select any options.
4 Latch the door to start the cycle.
1 Be sure the door is unlatched.
Slowly turn the Dial to SHORT WASH.
2
Latch the door to start the cycle.
3