Dial Cycles - Hotpoint HDA1000 Owner's Manual

il!i ilii
About the dishwasher control panel
O Start
Slowly mrn the Dial Io lhe STARTor ONposilion, or Ihe selecled cycle.
Don'l turn it past/he START,ONorcycle position, oryou could
accidentally miss a rinse. For models HDA2120and HDA2130, w hen
using/he POTS& PANScycle, slowly mrn lhe Dial to the NORMAL/POTS
& PANSposition and press lhe POTS& PANS 0N buuon. When using
the NORMAL(ycle, slowly mrn lhe Dial to lhe NORMAUPOTS&PANS
position and press the POTS& PANS OFFbuuon. See About the Dial
Cycles seclion tbr o/her cycles on lhese models.
There is a time delay between start-up and water fill so you will not
hear any wash aclion right mvay.
} Latch the door to begin the cycle.
About the dial cycles.
HOT START
Rinse Only
For rinsing partial loads that will be washed later. Do not
uso detergent.
{HEATED DRY ON} _]NSE ONLy{H_TED DRY OFF}
_: Be sure the door is unlatched.
{{{
{{_ Slowly Im-n lhe Dial to RINSE ONI._
!i!i{ '
Latch the door to slarl the cycle.
===
ii/i!@iiiii
iiiii!iiiH!! iiiiiHiil
HOT PREWASH OPTION
2 I START
HOURS 3
OELAY 4
O_F
[_ WATER
PLATEHE EWARM_R SAVE_
H_T_O _V om
10
Delayed Start
The HOURSDELAY_dll a llow you to delay the start
time of any cycle not on the Dial automatically tbr up
It)
6 hours.
Be sure the door is unlatched.
{
Select the wash cycle and option you want.
{{_ Slowly turn the Dial to desired time. The DELAYED
i{,, SYAR'Tlighl x dll come on.
Latch the door to start the cycle.
===