Step 8 Order Power Supply - Cisco UCS C220 M3 Spec Sheet

STEP 8 ORDER POWER SUPPLY
The C220 M3 LFF server accommodates two power supplies. A lightly loaded server can operate
from one 650 W power supply. A fully loaded server might need to be powered with two 450 W or
two 650 W power supplies (see
Use the power calculator at the following link to determine the needed power based on the
options chosen (CPUs, drives, memory, and so on):
https://express.salire.com/Go/Cisco/Cisco-UCS-Power-Calculator.aspx
Table 15
Product ID (PID)
UCSC-PSU-450W
UCSC-PSU-650W
UCSC-PSU-930WDC
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
Table
NOTE: For configurations that use 130 W or 135 W CPUs, the minimum power supply
required is 650 W (UCSC-PSU-650W). See
Power Supply PIDs
PID Description
450 W power supply
650 W power supply
930 W -48V DC power supply
NOTE: In a two power supply server, both power supplies must be identical.
15).
STEP 2 SELECT CPU(s), page
CONFIGURING the SERVER
13.
37