Check The Print Quality - Brother DCP-J152W Quick Setup Manual

f
Gently adjust the paper width guides to the
paper with both hands. Make sure that the
paper width guides touch the edges of the
paper.
g
Close the output paper tray cover.
h
Slowly push the paper tray completely into the
machine.
i
While holding the paper tray in place, pull out
the paper support a until it clicks, and then
unfold the paper support flap b.
6
5
a
b
c
2
1

Check the print quality

When the preparation process has finished, the
LCD shows Load Paper and Press Color
Start.
Press Color Start.
Check the quality of the four color blocks on the
sheet. (black/yellow/cyan/magenta)
If all lines are clear and visible, press + (Yes) to
finish the quality check and go to the next step.
OK
If lines are missing, press - (No) and follow the
steps on the LCD.
Poor