Position - Kenwood DNX9140 Instruction Manual

Position
You can adjust the sound effects according to
your Iistenin,g position.
D
Display the Positicln screen
Touch
[G~]
>
[Mt]
>
[Position]. (page 61)
D
Set the F'osition Cc)ntrol
[Pl] - [P3:] Stores the present adjustment setup
in merrory, or calls it from memory.
To store your adjustment in memory:
Continue to touch [P1] to [P3] more than 2
seconds.
To call your adjustment from memory:
Touch [P1] to [P3] of your adjustment you
wish to call from memory.
[~], [~]
Sets a listening position.
You can select any of "Front R" (Right front),
"Front L:' (Left front), "Front All" (All front), and
"All" (AI) positions.
[DTA] Displays the Position DTA (Digital Time
Alignment) screen.
D
Exit Posiition Control
~ ~,., ~
DTA
4"""'"
.
~
I:!!J' ,..
Ridgeview Road 99999
~
~
• The final distance is adjusted to the total of Car Type Set
Up value (page 82) and Position Setup (both Position and
Position DTA) value.
If you change the Car Type Set Up value (page 82), the
position is set to "All".
Only the adjusted distance of position setup (Position
and Position DTA values) is stored in memory. Therefore,
the final adjustment distance changes if you change the
Car Type Set Up value (page 82)
Position DTA Control
You can fine-adjust your listening position.
D
Display the Position DTA screen
DTA
4=
m! ,..
Ridgeview
Ro_ad___
9999.99m,
D
Select a speaker you wish to adjust
ITJ
Center speaker
[l] Left front speaker
W
Right front speaker
@] Left rear speaker
[3] Right rear speaker
[ill
Subwoofer
[~], [~]
Finely adjusts the value set with the
Position function.
[Total DTA] Indicates setup distance. The
adjusted distance (Position and Position
DTA values), and the total of the distance
adjusted by Car Type Set Up (page 82) and
the adjustment distance for position setup are
indicated.
D
Finely adjust the distance
Finely adjust the value set with the Position
function.
English 65