Character Entry; External Device Power Supply Control - Kenwood DNX9140 Instruction Manual

Character Entry
Character Entry screen
[I]
Enters characters.
[....],
[~]
Shifts the cursor.
[.A], ['Y] Scrolls up or down the character
button display.
[OWE]I [ABC]
Sets the key layout of the
character buttons.
ABC: Alphabetical key layout.
QWE : Qwerty key layout.
[Clear]
Clears the character.
If you erase a character, locate the cursor on it
and touch this button.
If touched more than 1 second, all the input
characters are erased.
[Space]
Enters a space.
f22
You can enter characters only after you have applied the
parking brake
48 DNX9140/DDX814/DDX8034BT
External Device Power Supply Control
Controlling the external device power supply.
D
Display the Source Select Screen
See <How to Select the Source> (page 12).
II
Display the EXT SW Control screen
D
Control the external device power supply
You can turn on or off the external device power
supply.
~
~
You must connect a commercially available relay unit in
order to use this function.
Connect the external device to be controlled to that
relay unit.
Refer to <EXT SW Setup> (page 71) for information on
setting the power on or off specification.