Artison PORTRAIT System Owner's Manual page 9

Presence Control Settings
The Presence Control changes the center channel tweeter level to compensate for differing
room acoustics. This can be adjusted with the three-position switch located in the Center
Channel terminal cup on the back of each LCR speaker.
26. Adjusting the Presence Control
• Normal - the toggle is set towards the outside of the system, away from the display.
Start with the switches in this position first.
• Decreased - the toggle is in the center position. This setting is for acoustically "hard';
highly reflective rooms.
• Increased - the toggle is set towards the display. This setting is for acoustically "soft';
highly absorbent rooms.
Important: Presence Control switches on both speakers should be set to the same positions
for proper balance of the center image.
Nons:
1.
Every LCR Speaker comes with a Main bracket that is used to attach the speakers to the display.
This bracket may also be used to wall mount the system when a Grille Kit is unavailable for
a particular display or because the customer would prefer wall mounting. There are Universal
Grille Kits available in gray, charcoal and black that will fit a 42';
50:'
or
60"
display.
2. Extra screws are included with each kit in case any are lost. It takes 2 screws per side to
secure the Televison Brackets and the Main Brackets together. The spare holes in the
Televison Brackets allow for different models of displays.
9