Table of Contents
Advertisement
From any of the screens on Page 23, you can press the FAN (right) button to begin entering your
program schedule . The days shown on the display will all be programmed simultaneously .
Once the FAN (right) button is pressed, MORN blinks .
Use the up or down button to select a different period (MORN, DAY, EVE, NITE) .
Press FAN (right) button to advance to the next screen . Transition time hour blinks .
Use the up or down button to select a different hour .
Press FAN (right) button to advance to the next screen . Transition time minutes blink .
Use the up or down button to select different minutes .
Press FAN (right) button to advance to the next screen . Heat set temperature displays .
Use the up or down button to adjust the heat set temperature .
Press FAN (right) button to advance to the next screen . Cool set temperature displays .
Use the up or down button to adjust the cool set temperature .
Press FAN (right) button to advance to the next screen . Programmable fan screen displays .
Use the up or down button to select:
Choose Off – Programmable fan disabled
On – Indoor fan on continuously
Note: Programmable fan operates in Program mode only .
Repeat above steps to program the four periods per day .
When the program schedule is complete, press and hold the PROG button (SYS and FAN buttons
pressed simultaneously) in for 2 seconds to return to the OFF mode .
Hide quick links:
Advertisement
Table of Contents
