Specifications; Troubleshooting; General; About Bluetooth Device - Philips BT3500 User Manual

6 Product
information
Note
•
Product information is subject to change without prior
notice.

Specifications

Amplifier
Rated Output Power
Signal to Noise Ratio
AUX Input
Bluetooth
Bluetooth version
Supported profiles
Range
General information
Power Supply (through
USB socket)
Built-in Battery
Dimensions - Main Unit
(W x H x D)
Weight - Main Unit
2 X 5 W RMS
> 62 dBA
600 mV
V3.0+EDR
HFP v1.6, A2DP v2.1,
AVRCP v1.0
10 m (Free space)
5 V 1 A
Li-polymer battery
(3.7 V, 2200 mAh)
201 x 101 x 35 mm
0.5 kg

7 Troubleshooting

Warning
•
Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact Philips,
make sure that the device is nearby and the
model number and serial number are available.

General

No power
• Recharge your speaker.
No sound
•
Adjust volume on the speaker or the
Bluetooth-connected device.
•
Make sure that your Bluetooth device is
within the effective operational range.
No response from the speaker
•
Restart the speaker.

About Bluetooth device

The audio quality is poor after connection
with a Bluetooth-enabled device.
•
The Bluetooth reception is poor. Move the
device closer to this product or remove
any obstacle between them.
Cannot connect with the device.
•
The Bluetooth function of the device is not
enabled. Refer to the user manual of the
device for how to enable the function.
EN 9