Get Started; Place The Speaker; Charge The Built-In Battery; Turn On/Off - Philips BT3500 User Manual

3 Get started

Always follow the instructions in this chapter in
sequence.

Place the speaker

To place the speaker on a flat surface, pull out
the retractable stand from the backside of the
speaker.

Charge the built-in battery

The speaker is powered by a built-in
rechargeable battery.
Note
•
Before use, fully charge the built-in battery.
•
The micro USB socket is for charging only.
•
Rechargeable battery has a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
Connect the USB cable between
the DC IN socket on the speaker, and
•
• a USB socket of a computer.
DC IN
The LED indicator on the top indicates the
battery status.
When the speaker is
turned off
When the speaker is
turned off
When the speaker is in
Bluetooth or Audio-in
mode

Turn on/off

• To turn the speaker on, slide the source
or AUDIO IN.
selector to
» The speaker switches to the Bluetooth
or Audio in mode.
• To turn the speaker off, slide the source
selector to OFF.
LED Battery
indicator status
Solid red Under
charging
Off Fully
charged
Flashing Low
red power
EN
5