Setting Memory Positions And Linking Rke; Transmitter To Memory - Chrysler Town & Country 2014 Owner's Manual

Setting Memory Positions And Linking RKE

Transmitter To Memory

NOTE: Each time the SET (S) button and a numbered
button (1 or 2) is pressed, you erase the memory settings
for that button and store a new one.
1. Insert the ignition key and turn the ignition switch to
the ON position.
2. Adjust the driver's seat, recliner, and driver's side-
view mirror to the desired positions.
3. Adjust the brake and accelerator pedals to the desired
positions.
4. Turn on the radio and set the radio station presets (up
to 10 AM and 10 FM stations can be set).
5. Turn the ignition switch to the OFF position and
remove the key.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221
6. Press and release the SET (S) button located on the
driver's door.
7. Within five seconds, press and release MEMORY
button 1 or 2 on the driver's door. The next step must
be performed within five seconds if you desire to also
use a RKE transmitter to recall memory positions.
8. Select "Remote Linked to Memory" in the Electronic
Vehicle Information Center (EVIC) and enter "Yes".
Refer to "Electronic Vehicle Information Center
(EVIC)/Customer-Programmable Features" in "Un-
derstanding Your Instrument Panel" for further infor-
mation.
9. Press and release the LOCK button on one of the RKE
transmitters.
10. Insert the ignition key and turn the ignition switch to
the ON position.
3