NordicTrack NTST00890 Quick Manual

Congratulations! By purchasing the NordicTrack
the first step toward enhancing your physical fitness. Your Mini Stepper is
designed to provide you with all the benefits of a low-impact cardiovascular
workout in the convenience of your home. The Mini Stepper is compact and
portable, perfect for use almost anywhere.
Model Number NTST00890
BEFORE YOU BEGIN
For your safety and benefit, carefully read these
instructions before using the Mini Stepper. If you
have questions, or if there are missing or damaged parts,
we will guarantee complete satisfaction through direct
assistance from our factory. Please call our Customer
Service Department toll-free at
through Friday, 6 a.m. until 6 p.m. Mountain Time (exclud-
ing holidays).
ASSEMBLY
Set all parts of the Mini Stepper in a cleared area and
remove the packing materials. Do not dispose of the
packing materials until assembly is complete. No tools
are required for assembly.
1. Your NordicTrack ¨ Mini Stepper workout monitor is
easy to install. You will need two 1154 watch batter-
ies.
Using a coin, pry open the monitor as shown
below. Lift the back off the monitor.
¨ Mini Stepper you have taken
NordicTrack
1-888-825-2588
, Monday
¨ is a registered trademark of ICON Health & Fitness, Inc.
Next, turn the 1154 watch batteries so the positive
(+) sides are facing up and insert them into the bat-
tery clips. Snap the monitor back together.
Battery
Clips
2. Press the two posts on the back of the monitor into
the holes in the center of your Mini Stepper as
shown below.