D-Link DXS-3600-32S Reference Manual page 29

Category Log Description
Event description: Port link down.
Log Message: Port <portNum> link down
Parameters description:
portNum: 1.Interger value;2.Represent the logic port number of the device.
802.1X Event description: 802.1X Authentication failure.
Log Message: 802.1X Authentication failure [for <reason> ] from
(Username: <username>, <interface-id>, MAC: <macaddr> )
Parameters description:
reason: The reason for the failed authentication.
username: The user that is being authenticated..
interface-id: The interface name.
macaddr: The MAC address of thr authenticated device.
Event description: 802.1X Authentication successful.
Log Message: 802.1X Authentication successful from (Username:
<username>, <interface-id>, MAC: <macaddr>)
Parameters description:
username: The user that is being authenticated.
interface-id: The interface name.
macaddr: The MAC address of the authenticated device.
RADIUS Event description: VID assigned from RADIUS server after RADIUS client is
authenticated by RADIUS server successfully .This VID will be assigned to
the port and this port will be the VLAN untagged port member.
Log Message: RADIUS server <ipaddr> assigned VID :<vlanID> to port
<interface-id> (account :<username> )
Parameters description:
ipaddr: The IP address of the RADIUS server.
vlanID: The VID of RADIUS assigned VLAN.
interface-id: The interface name.
Username: The user that is being authenticated.
Event description: Ingress bandwidth assigned from RADIUS server after
RADIUS client is authenticated by RADIUS server successfully .This
Ingress bandwidth will be assigned to the port.
Log Message: RADIUS server <ipaddr> assigned ingress bandwith
:<ingressBandwidth> to port <interface-id> (account : <username>)
Parameters description:
ipaddr: The IP address of the RADIUS server.
ingressBandwidth: The ingress bandwidth of RADIUS assign.
interface-id: The interface name.
Username: The user that is being authenticated.
Event description: Egress bandwidth assigned from RADIUS server after
RADIUS client is authenticated by RADIUS server successfully .This egress
bandwidth will be assigned to the port.
Log Message: RADIUS server <ipaddr> assigned egress bandwith
:<egressBandwidth> to port <interface-id> (account: <username>)
Parameters description:
ipaddr: The IP address of the RADIUS server.
egressBandwidth: The egress bandwidth of RADIUS assign.
interface-id: The interface name.
Username: The user that is being authenticated.
DXS-3600-32S 10GbE Layer 2/3 Switch Web UI Reference Guide
24
Severity Note
Informational
Warning
Informational
Informational
Informational
Informational