Reinstall The Tv - Philips 32PFL6606H User Manual

Update from the Internet
If the TV is connected to a router that is
connected to the Internet, you can update
the TV software directly from the Internet.
You need a high speed Internet connection.
> [Setup] > [Update now] and
1. Press
press OK.
2. Select [Internet] and press OK.
3. Follow the instructions onscreen.
When the update is done, the TV switches
off and back on again automatically. Wait for
the TV to switch back on; do not use the
power switch on the TV.
If the TV is connected to the Internet, the
TV displays the availability of new software
at start up.
Onscreen Help
What you need
Before you update the onscreen [Help],
make sure that you have the following:

A USB storage device which is FAT or
DOS-formatted.

Do not use a USB hard drive.

A PC with Internet access.

An archive utility that supports the ZIP
file format (for example, WinZip for
Microsoft Windows or Stufflt for
Macintosh).
Download the latest file
1. Insert a USB storage device into the USB
connector on your PC.
2. On your PC, create a folder named
'upgrades' in the root directory of the USB
storage device.
3. In your web browser, navigate to
www.philips.com/support.
4. At the Philips Support site, find your
product and locate the [Help] file for your
TV. The file (a *.upg file) is compressed into
a *.zip archive.
5. If the [Help] file is a later version than the
file in your TV, click it.
6. Save it to the USB storage device.
7. Using the archive utility, extract the *.zip
file to the 'upgrades' folder in the USB
storage device.
8. The *.upg [Help] file is extracted.
9. Disconnect the USB storage device from
the PC.
Update [Help]

Do not switch off the TV or remove
the USB storage device during the
update.

If a power failure occurs during the
update, do not remove the USB
storage device from the TV. The TV
continues to update as soon as power
is restored.

If an error occurs during the update,
retry the procedure. If the error
reoccurs, contact Philips Consumer
Care.
1. Switch on the TV.
2. Disconnect all other USB devices from the
TV.
3. Connect the USB storage device
containing the *.upg file to the USB
connector on the TV.
4. Press .
5. Select [Setup] > [Software settings] >
[Local updates] .
The updates screen appears.
6. Select the '*.upg' file and press OK.
A message displays the update status.
7. Follow the onscreen instructions to
complete the update and restart your TV.

Reinstall the TV

Reinstall your TV to reset all picture and
sound settings and reinstall all TV channels.
1. Press .
2. Select [Setup] > [TV settings] >
[Reinstall TV], then press OK.
3. Follow the onscreen instructions.
EN 37