Contents Get started Troubleshooting TV tour Contact Philips Important General TV Environmental efforts TV channel Position the TV Picture Help and support Sound HDMI Use your TV Controls Network Watch TV Product specifications Watch a connected device Ambilight Power and reception...
1 Get started TV tour Remote control To open or close the Find menu. In the Find menu, access the channel list. To adjust the volume. To open or close the Adjust menu. In the Adjust menu, access a range of frequently used settings.
Page 4
Connect devices To exit from menu or TV function. To select a red menu option, access Digital Interactive TV services*, or watch TV demonstration clips. *Available on certain models only. For the best picture and sound quality, connect a DVD, Blu-ray disc player, or game console through HDMI (TM).
Page 5
TV. Net TV offers movies, pictures, music For more information about the availability and much more. of HD channels in your country, contact Read more in Use your TV > Browse Net your Philips dealer or visit TV (Page 21). www.philips.com/support.
When stand mounting the TV, use only the power outlet immediately. Contact the supplied stand. Secure the stand to Philips Consumer Care to have the TV the TV tightly. Place the TV on a flat, checked before use. level surface that can support the ...
Always leave a space of at least 4 inches Energy efficiency or 10 cm around the TV for ventilation. Philips continuously focuses on lowering the Ensure that curtains or other objects environmental impact of our innovative never cover the ventilation slots on the consumer products.
Page 8
Power switch: You can completely cut When this crossed-out wheeled bin symbol is attached to a product it means that the off power to the TV with the power product is covered by the European switch. It is located at the base of the Directive 2002/96/EC.
Electronics N.V. bears no responsibility for improper TV mounting that results in accident, injury or damage. Before you mount the TV: Purchase a Philips TV mount or a Location compatible TV mount. A range of TV settings are applied to suit the ...
Lock the TV Contact Philips Your TV is equipped with a Kensington If you like, you can contact Philips Consumer security slot at the base of the TV. Purchase Care in your country for support. You can a Kensington anti-theft lock (not supplied) to find the contact number in the leaflet secure the TV.
2 Use your TV Indicators Controls TV controls 1. Ambient sensor / remote control sensor Ambient sensor is available on certain models only. Remote control +/-: Increase or decrease volume. 2. AMBILIGHT: Switch Ambilight on or off. Ambilight is available on certain models only. (Home): Access the Home menu.
Page 12
Caution: The battery contains perchlorate (Home): Access the Home menu. (Navigation buttons): Navigate material, handle it with care. For information, through menus and select items. CH - / CH + (Previous/Next): www.dtsc.ca.gov/hazardouswaste/perchlorat Switch channels, navigate through menu pages, tracks, albums or folders. If your remote control signal is weak, replace 7.
You can also view a slideshow of the images in your smartphone on the TV. To download the application 'Philips My Remote', visit the Apple Apps store or the Android Market. Follow the instructions provided at the applications store.
Page 14
Switch the TV on Press the power switch at the base of the TV to the ON position. If the TV is in standby, press on the remote control. Note: There is a short delay before the TV responds.
Page 15
Manage channel lists View programme guide You can view all channels or only your The programme guide displays information favourite channels in the channel list. about digital TV channels, for example: Channel schedules FIND. The While you watch TV, press ...
The available picture formats depend on the Use smart picture settings video source: Select your preferred picture setting. [Auto fill]: Adjust the picture to fill the 1. While you watch TV, press ADJUST. screen (subtitles remain visible). 2. Select [Smart picture]. Recommended for minimal screen 3.
Page 17
USB storage device, you can play the files on press or . Press EXIT to exit the content browser. Caution: Philips is not responsible if the USB Press OPTIONS to access or exit the storage device is not supported, nor is it following picture options: responsible for damage or loss of data in the ...
[Slideshow transition]: Set the transition from one picture to the next. [Set as Scenea]: Set the selected picture as wallpaper on TV. Ambilight What you can do *Available on certain models only. Ambilight gives a more relaxed viewing experience.
Allow. Play (uPnP) router. A green tick appears next to the device. A Philips wireless USB adapter or a By default, Windows Media Player LAN cable that connects your TV to shares files from these folders: My your home network.
Page 20
Enable sharing on Windows Media Play files from computer Player 12 Note: Before you play multimedia content from the computer, make sure that the TV is 1. Start Windows Media Player on your connected to the home network, and the computer.
1. On your home network, connect the TV to the Internet 2. On your TV, configure Net TV. 3. On your PC, register with Philips to enjoy exclusive benefits and receive updates on product information. You can register now or later.
OPTIONS and select [Show Press Access Net TV Applications (Apps) remote control]. Use the onscreen keys to The first page shown is the Net TV home operate the connected audio or video page. The icons on this page represent the player.
Page 23
SD memory size Rent Use a blank SD memory card of type SDHC View a video store class 6, with at least 4 GB of storage 1. Press . capacity. 2. Select [Browse Net TV] and press OK. For high-definition video, make sure that you 3.
Watch video To find out what interactive services are 1. Press , select [Browse Net TV]. available, contact your broadcasters. The installed video stores are displayed. Access application 2. Select the video store where you rented the video, then press OK. 1.
USB hard disk to the TV and USB hard disk until this process is complete. format it. Caution: Philips is not responsible if the USB hard device is not supported, nor is it responsible for damage or loss of data in the device. ...
Pause a live TV broadcast Switch to another channel. Switch source to watch from a connected device - a Blu-ray disc player or digital receiver. To change playback speed Press repeatedly. To jump back to the beginning of the TV broadcast Press the left navigation button repeatedly until you reach the beginning of the...
Page 27
USB hard disk to the TV and format it. Caution: Philips is not responsible if the USB hard device is not supported, nor is it responsible for damage or loss of data in the device.
Page 28
If your TV remote control does not have a Set a timed recording button: To manually set a recording that is not linked to any programme: and select [Programme guide]. 1. Press 1. From the programme guide page, press 2. With the current TV programme selected, OPTIONS, select [Manual record], and OPTIONS and select [Record].
Cancel a scheduled recording Access HbbTV To cancel a scheduled recording: When you tune to a TV channel that offers 1. Select the recording and press HbbTV, the interactive pages will open OPTIONS. automatically or, at some point, you will be 2.
Teletext language View Teletext Some digital TV broadcasters provide several teletext languages. You can set your primary Select a page and secondary language. 1. Select a channel that has teletext feature, 1. Press . then press TEXT. 2. Select [Setup] > [Channel settings] or 2.
1. In the [Clock] menu, select [Date] or Teletext 2.5 [Time], then press OK. Teletext 2.5 offers more colours and better 2. Use the Navigation buttons to make your graphics than normal teletext. If Teletext 2.5 selection. is broadcast by a channel, it is switched on 3.
Parental rating Subtitle language Some digital broadcasters rate their You can change the subtitle language on programmes according to age. You can set some digital channels. your TV to display only programmes with 1. Press . age ratings lower than your child's age. 2.
TV > Use EasyLink > Anynet (Samsung), Aquos Link (Sharp) or Maximize display for video with subtitles BRAVIA Sync (Sony). Not all brands are fully compatible with Philips EasyLink. (Page 35). After you switch on Philips EasyLink, these features are available:...
Page 34
Other EasyLink buttons are available through To switch on or off EasyLink the On-Screen Remote Control (OSRC). Note: If you do not intend to use Philips To access the OSRC Easylink, switch it off. 1. While you view content from a connected 1.
Page 35
TV is in standby. system audio control. TV audio is then 1. Press ADJUST to receive audio from streamed through the connected the connected Philips EasyLink device. device. If available, audio only mode is enabled. [Amplifier]: Stream audio through the 2.
4 Set up your TV [PC mode]: Allow picture settings to be changed when a PC is connected to the TV through HDMI. If enabled, you can select [Picture Settings assistant format] > [Unscaled] which provides maximum detail for display of PC Use the settings assistant to guide you content.
Audio settings Channels Select audio language If the TV channel has multiple or dual sound Reorder and rename broadcast, you can select the preferred audio language. Reorder channels OPTIONS. While you watch TV, press After the channels are installed, you can ...
Page 38
To manually update channels Hide or unhide 1. Press . Hide channels 2. Select [Setup] > [Search for channels] > To prevent unauthorised access to channels, [Update channels], then press OK. hide them from the channel list. 3. Follow the onscreen instructions to FIND.
Page 39
Notes Install analogue channels If the reception is poor, reposition your You can search and store analogue TV antenna and repeat the procedure. channels manually. If you receive the channel with DVB-C, Step 1: Select your system select [Automatic] in [Symbol rate Note: Skip this step if your system settings mode] unless your cable provider are correct.
4. Select [Setup] > [TV settings] > [Preferences] > [Channel list copy] > You can copy channel lists from one Philips [Copy to TV], then press OK.The channel TV to another through a USB storage device. You do not need to search for list is copied to the TV.
Green - [Speakers]: Hear visually Set universal access impaired audio from speakers only. Blue - [Speakers + headphones]: Hear Switch on visually impaired audio from speakers and headphones. Some digital TV broadcasters provide special 4. Press EXIT to exit. audio and subtitle features for people who Note: If the EasyLink remote control is are hearing or visually impaired.
Wait for the TV to switch back on. Do not on your product. Philips cannot be held use the power switch on the TV or the liable or be made responsible for problems remote control.
2. Select [Setup] > [TV settings] > www.philips.com/support. [Reinstall TV], then press OK. 4. At the Philips Support site, find your 3. Follow the onscreen instructions. product and locate the [Help] file for your TV. The file (a *.upg file) is compressed into a *.zip archive.
5 Connect your About cables Cable quality Overview Before you connect devices to the TV, check the available connectors on the device. Connect the device to the TV with the highest quality connection available. Good quality cables ensure a good transfer of picture and sound.
SCART A SCART cable combines video and audio Use this connection to display PC content signals. on the TV. SCART connectors can handle RGB video For video and sound, use the VGA and signals but cannot handle high-definition AUDIO IN connectors. (HD) TV signals.
Page 46
Blu-ray or DVD disc player Connect the disc player with an HDMI cable to the TV. Connect the disc player with a component cable (Y Pb Pr) and an audio L/R cable to the TV. TV receiver Connect the satellite or digital TV receiver with an antenna cable to the TV. (SAT is available on certain models only.)
Page 47
Connect the satellite or digital TV receiver with an HDMI cable to the TV. Connect the satellite or digital TV receiver with a SCART cable to the TV. Connect the satellite or digital TV receiver with a component cable (Y Pb Pr) and an audio L/R cable to the TV.
Page 48
Recorder Connect the recorder with an antenna cable to the TV. (SAT is available on certain models only.) Connect the recorder with a SCART cable to the TV. Connect the recorder with a component cable (Y Pb Pr) and an audio L/R cable to the TV.
Page 49
For the best gaming experience, set the TV Game console to game mode. The most practical connectors for a game ADJUST. 1. Press console are on the side of the TV. However, 2. Select [Smart picture] > [Game], then you can also use the connectors at the back press OK.
Page 50
Connect the home theatre with a SCART cable to the TV. Connect the home theatre with a component cable (Y Pb Pr) and an audio L/R cable to the TV. Digital camera Connect the digital camera with a USB cable to the TV.
Digital camcorder Connect the digital camera with an HDMI cable to the TV. Connect the digital camcorder with a component cable (Y Pb Pr) and an audio L/R cable to the TV. Connect more devices External hard disk Connect the external hard disk with a USB cable to the TV.
Page 52
Computer Connect the computer with an HDMI cable to the TV. Connect the computer with a DVI-HDMI cable to the TV. Connect the computer with a VGA cable and an audio cable to the TV.
USB mouse Keyboard and mouse *Available on certain models only. USB keyboard You can connect a USB mouse to navigate *Available on certain models only. pages on the Internet. On an Internet page, You can connect a USB keyboard to enter you can select and click on links more easily.
Page 54
Net TV 1. Switch on the router and switch on its DHCP setting. If you connect the TV to a home network with an Internet connection, you can link up 2. With the ethernet cable, connect the the TV to Net TV. Net TV offers Internet router to the TV.
Page 55
PIN code When playing video over your wireless home network, we recommend that To set the secured connection with a PIN you use an IEEE 802.11 N router. The code, select the PIN code and press OK. connection speed may differ according Write down the 8 digit PIN code shown on to the operating environment of your the TV and enter it in the router software...
Page 56
For the availability of the wireless USB adapter, check with your local retailers or You can project high-definition (HD) or buy online at www.philips.com/tv. standard-definition (SD) video, depending on the processing power of your PC. Install Wi-Fi MediaConnect (with CD- ...
1. Switch off the TV. Common interface 2. Follow the directions printed on the CAM and insert the CAM into the Common Interface at the side of the TV. What you can do 3. Push the CAM in as far as it will go, then To watch some digital TV programmes, you wait for the CAM to be activated.
TV at www.philips.com/support. When the TV is in standby, a startup splash screen is displayed, then returns to standby You can also contact Philips Consumer Care mode: in your country for support. You can find the This is normal behavior. When the TV is...
An "e-sticker" banner displaying Picture information appears on the TV display: The TV is in [Shop] mode. To remove the The TV is on, but there is no picture or the e-sticker, set the TV to [Home] mode, then picture is distorted: restart the TV.
HDMI Network There are problems with HDMI devices: Net TV does not work If the connection to the router is properly Note that HDCP (High-bandwidth set up, check the router connection to the Digital Content Protection) support can Internet. delay the time taken for a TV to display content from a HDMI device.
For power consumption, see the Dynamic Bass Enhancement product specifications at Mono / Stereo / NICAM www.philips.com/support. The power rating stated on the product Display resolutions typeplate is the power consumption for this product during normal household use (IEC Computer formats - HDMI 62087 Ed.2).
Use your TV legend to note the weight of the TV with stand. Use your TV legend to note the dimensions of your TV (with and without the stand). Use your TV legend to note the thickness of your TV (with and without the stand). Help version UMv 3139 137 04193- 2011 0831...
Page 68
Any operation expressly prohibited in market products that cause no adverse health this manual, or any adjustments and effects. Philips confi rms that if its products are assembly procedures not recommended handled properly for their intended use, they or authorised in this manual shall void the are safe to use according to scientifi...
Page 69
Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further DLNA , the DLNA Logo and DLNA developments in standardisation for early CERTIFIED are trademarks, service marks integration in its products.
Page 70
Info for UK only. Information about how to re-tune your TV during the digital TV switchover. How the switchover affects Television in the UK is going digital, bringing us all more choice and new services. Starting in your TV equipment: late 2007 and ending in 2012, television services in the UK will go completely digital, TV Your new TV has a digital tuner built in, which...
Page 71
How to re-tune: Digital UK, the body leading the digital TV 1. Press h on the remote control. switchover, will advise you when you need to re-tune during the switchover. 2. Select Setup and press OK. If you do not re-tune your channels when 3.
Page 72
North: 0 800 331 6015 Slovensko 0800 004537 Bezplatný hovor Italia 800 088774 Numero Verde Slovenija 080080254 lokalni klic Қазақстан +7 727 250 66 17 local This information is correct at the time of print. For updated information, see www.philips.com/support.