Professional flat tv with crystal clear iii 15" lcd (2 pages)
Summary of Contents for PHILIPS 32PFL6606H
Register your product and get support at www.philips.com/welcome EN User Manual 32PFL66x6H 37PFL66x6H 40PFL66x6H 46PFL66x6H 55PFL66x6H 32PFL66x6K 37PFL66x6K 40PFL66x6K 46PFL66x6K 55PFL66x6K 32PFL66x6T 37PFL66x6T 40PFL66x6T 46PFL66x6T 55PFL66x6T...
Update software Reinstall the TV Connect your TV About cables Connect devices Connect more devices Computers and the Internet Common interface Troubleshooting Contact Philips General TV TV channel Picture Sound HDMI Network Product specifications Power and reception Display and sound...
1 Get started TV tour Remote control To adjust the volume. To switch TV channels. To open or close the Home menu. In the Home menu, access connected devices, picture and sound settings, and other useful features. To open or close the Source menu. In the Source menu, access connected devices.
To select a green menu option or to access energy efficient settings. To select a yellow menu option or to access the electronic user manual. Read more about the remote control in Use your TV > Controls > Remote control (Page 11).
Watch Demo is on the second page of the setup menu. For more information about the availability of HD channels in your country, contact your Philips dealer or visit www.philips.com/support. Ambilight *Available on certain models only. Ambilight gives a more relaxed viewing experience.
Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use. Never insert objects into the ventilation slots or other openings on the TV.
Environmental efforts Energy efficiency Philips continuously focuses on lowering the environmental impact of our innovative consumer products. We aim our efforts towards environmental improvements during manufacturing, reduction of harmful substances, energy-efficient use, end-of-life instructions and product recycling.
Power management: The advanced power management of this TV ensures the most efficient use of its energy. To view how your personalised TV settings affect the TV's relative power consumption, press and select [Setup] > [Watch demos] > [Active Control].
TV mounting that results in accident, injury or damage. Before you mount the TV: Purchase a Philips TV mount or a compatible TV mount. For certain models, remove the wall mount plugs from the back of the TV.
(available in certain countries only) Contact Philips If you like, you can contact Philips Consumer Care in your country for support. You can find the contact number in the leaflet accompanying the TV.
2 Use your TV Controls TV controls +/-: Increase or decrease volume. 2. AMBILIGHT: Switch Ambilight on or off. Ambilight is available on certain models only. (Home): Access the Home menu. Press again to launch an activity in the Home menu.
(Home): Access the Home menu. (Navigation buttons): Navigate through menus and select items. 6. CH - / CH + (Previous/Next): Switch channels, navigate through menu pages, tracks, albums or folders. 7. OK: Confirm an entry or selection. (Back): Return to the previous menu page or exit from a TV function.
Smartphone control Use your iPhone as a secondary remote, and even as a keyboard. Go to the Apple Apps store and download the application 'Philips Wifi TV Remote'. Follow the instructions provided at the Apps store. Ensure that your TV is connected to the same network as your iPhone.
Watch TV Switch TV on or off Switch the TV on Press the power switch at the base of the TV to the ON position. If the TV is in standby, press remote control. Note: There is a short delay before the TV responds.
Switch TV channels Press on the remote control. Press CH +/- on the TV. Press the Numeric buttons to enter a channel number. Manage channel lists You can view all channels or only your favourite channels in the channel list. FIND.
Use TV programme guide options You can customise the displayed information Remind you when programmes start Display only preferred channels 1. In the programme guide, press OPTIONS. 2. Select one of these settings, then press [Set reminder]: Set programme reminders.
If you have photos, videos or music files on a USB storage device, you can play the files on Caution: Philips is not responsible if the USB storage device is not supported, nor is it responsible for damage or loss of data in the device.
Listen to music Press the Navigation buttons to select a music track, then press OK. Press to search forward or backward within a track. Press and hold to exit content browser. Press OPTIONS to access or exit the following music options: ...
A wired or wireless home network, connected with a Universal Plug and Play (uPnP) router. A Philips wireless USB adapter or a LAN cable that connects your TV to your home network. A media server such as: PC running Windows Media Player 11 or higher;...
You will also need to set up the network connection: Connect your TV and the computer to the same home network. See Connect your TV > Computers and the Internet (Page 52). Switch on your computer and the router.
All to New in the App store. Net TV displays one page at a time, in full screen. Koninklijke Philips Electronics N.V. bears no responsibility regarding the content and the quality of the content provided by the content service providers.
1. On your home network, connect the TV to the Internet 2. On your TV, configure Net TV. 3. On your PC, register with Philips to enjoy exclusive benefits and receive updates on product information. You can register now or later.
Options Press OPTIONS to select the following: Remove App Lock App Unlock App Move App Show remote control Keys such as play , rewind forward can be called up with [Show remote control]. OPTIONS and select [Show Press remote control].
Format an SD card Before you download rented videos, your SD card must be formatted. 1. Switch on the TV. 2. As illustrated, insert the SD memory card into the SD card slot on the side of the TV. The TV automatically starts formatting the card.
3 Use more of your TV Enjoy HbbTV What you can do Some broadcasters of digital channels offer interactive HbbTV (Hybrid Broadcast Broadband TV). With HbbTV, broadcasters combine their normal TV programme with all kinds of information or entertainment. You can browse this information interactively.
TV. If you need extra USB connectors, use a USB hub. Installation Caution: Philips is not responsible if the USB hard disk device is not supported, nor is it responsible for damage or loss of data in the device.
Pause live broadcast While you watch a live TV broadcast on a digital channel, you can pause the broadcast and continue watching it later. You can pause TV to answer an urgent phone call or have a break without having to wait for the TV commercials.
Record a programme You can schedule a recording of an upcoming programme for today or a few days from today (maximum of 8 days away). To schedule a recording, press select [Programme guide]. At the programme guide page, select the channel and programme you wish to record.
Teletext options 1. When you view teletext, press OPTIONS. 2. Select one of the following options: [Freeze page] / [Unfreeze page]: Freeze or unfreeze the current page. [Dual screen] / [Full screen]: Enable or disable dual screen teletext. Dual screen splits the current channel or source to the left of the screen, with teletext on the right.
Set locks and timers Clock You can display a clock on the TV screen. The clock displays the time that is broadcast by your TV service operator. Display the TV clock 1. While you watch TV, press 2. Select [Status], then press OK. The clock is displayed on the lower right hand corner of the TV screen.
Parental rating Some digital broadcasters rate their programmes according to age. You can set your TV to display only programmes with age ratings lower than your child's age. 1. Press . 2. Select [Setup] > [Channel settings] or [Satellite settings]. 3.
Set TV wallpaper You can load another picture as the wallpaper. Note: Loading a new picture overrides the existing picture. 1. Connect the USB storage device to the 2. Press . 3. Select [Browse USB], then press OK. 4. Select a picture, then press 5.
Some examples are Anynet (Samsung), Aquos Link (Sharp) or BRAVIA Sync (Sony). Not all brands are fully compatible with Philips EasyLink. After you switch on Philips EasyLink, these features are available: One-touch play When you play an HDMI-CEC compliant device, the TV switches on from standby, and switches to the correct source.
Switch on EasyLink Switch on To switch on or off EasyLink Note: If you do not intend to use Philips Easylink, switch it off. 1. Press . 2. Select [Setup] > [TV settings] > [EasyLink]. 3. Select [On] or [Off], then press OK.
TV speakers, even when the TV is in standby. 1. Press the connected Philips EasyLink device. If available, audio only mode is enabled. 2. Accept the prompt on the TV to turn off the TV screen.
4 Set up your TV Settings assistant Use the settings assistant to guide you through the picture and sound settings. 1. While you watch TV, press . 2. Select [Setup] > [Quick picture and sound settings], then press OK. 3. Select [Start], then press OK. 4.
Audio settings Select audio language If the TV channel has multiple or dual sound broadcast, you can select the preferred audio language. While you watch TV, press [Audio language]: Select the audio language for digital channels. [Dual I-II]: Select the audio language for analogue channels.
Hide or unhide Hide channels To prevent unauthorised access to channels, hide them from the channel list. 1. While you watch TV, press 2. Select the channel to rename and press OPTIONS. 3. Select [Hide channel], then press OK. The channel is hidden. Unhide channels 1.
Install analogue channels You can search and store analogue TV channels manually. Step 1: Select your system Note: Skip this step if your system settings are correct. 1. While you watch TV, press . 2. Select [Setup] > [Channel settings] > [Channel installation].
Reinstall channels ATTENTION: This feature is intended for dealers and service personnel. You can copy channel lists from one Philips TV to another through a USB storage device. You do not need to search for channels or install them again on the second TV.
Caution: Do not install a lower version of software than the current version installed on your product. Philips cannot be held liable or be made responsible for problems caused by a software downgrade. Update the software through one of these options: ...
USB storage device. 3. In your web browser, navigate to www.philips.com/support. 4. At the Philips Support site, find your product and locate the [Help] file for your TV. The file (a *.upg file) is compressed into a *.zip archive.
5 Connect your About cables Cable quality Overview Before you connect devices to the TV, check the available connectors on the device. Connect the device to the TV with the highest quality connection available. Good quality cables ensure a good transfer of picture and sound.
SCART A SCART cable combines video and audio signals. SCART connectors can handle RGB video signals but cannot handle high-definition (HD) TV signals. Connect devices Overview You can connect your devices to the TV with any of the following options. After connection, press >...
Blu-ray or DVD disc player Connect the disc player with an HDMI cable to the TV. Connect the disc player with a component cable (Y Pb Pr) and an audio L/R cable to the TV. TV receiver Connect the satellite or digital TV receiver with an antenna cable to the TV. (SAT is available on certain models only.)
Connect the satellite or digital TV receiver with an HDMI cable to the TV. Connect the satellite or digital TV receiver with a SCART cable to the TV. Connect the satellite or digital TV receiver with a component cable (Y Pb Pr) and an audio L/R cable to the TV.
Recorder Connect the recorder with an antenna cable to the TV. (SAT is available on certain models only.) Connect the recorder with a SCART cable to the TV. Connect the recorder with a component cable (Y Pb Pr) and an audio L/R cable to the TV.
Game console The most practical connectors for a game console are on the side of the TV. However, you can also use the connectors at the back of the TV. Connect the game console with an HDMI cable to the TV. Connect the game console with a component cable (Y Pb Pr) and an audio L/R cable to the TV.
Home theatre system Connect the home theatre with an HDMI cable and an optical or coaxial audio cable to the TV. (Optical audio output is available on certain models only.) Connect the home theatre with a SCART cable to the TV. Connect the home theatre with a component cable (Y Pb Pr) and an audio L/R cable to the TV.
Digital camera Connect the digital camera with a USB cable to the TV. Digital camcorder Connect the digital camera with an HDMI cable to the TV. Connect the digital camcorder with a component cable (Y Pb Pr) and an audio L/R cable to the TV.
Connect more devices External hard disk Connect the external hard disk with a USB cable to the TV. Computer Connect the computer with an HDMI cable to the TV. Connect the computer with a DVI-HDMI cable to the TV.
Connect the computer with a VGA cable and an audio cable to the TV. Computers and the Internet What you can do Network benefits If you connect your TV to a computer network with storage devices such as computers, you can play the photos, music and videos on your devices.
Connect 1. Switch on the router and switch on its DHCP setting. 2. With the ethernet cable, connect the router to the TV. Alternatively, you can also connect the router to the TV wirelessly, through a wireless USB adaptor (not included). See Connect your TV >...
A wireless USB adapter (only for TVs which are not Wi-Fi integrated). For the availability of the wireless USB adapter, check with your local retailers or buy online at www.philips.com/tv. Install Wi-Fi MediaConnect 1. Insert the Wi-Fi MediaConnect CD-ROM in your PC.
Specifics You can project high-definition (HD) or standard-definition (SD) video, depending on the processing power of your PC. Due to output content protection, certain commercial DVD or Blu-ray discs may not be projected. The TV shows PC media files with a small delay.
If you cannot resolve your problem, refer to the frequently asked questions (FAQs) for this TV at www.philips.com/support. You can also contact Philips Consumer Care in your country for support. You can find the contact number in the leaflet that accompanies the TV.
Picture The TV is on, but there is no picture or the picture is distorted: Make sure that the antenna is properly connected to the TV. Make sure that the correct device is selected as the display source. ...
HDMI There are problems with HDMI devices: Note that HDCP (High-bandwidth Digital Content Protection) support can delay the time taken for a TV to display content from a HDMI device. If the TV does not recognise the HDMI device and no picture is displayed, switch the source from one device to another and back again.
Standby power: < 0.15 W Ambient temperature: 5 to 40 degree Celsius For power consumption, see the product specifications at www.philips.com/support. Reception Antenna input: 75 ohm coaxial (IEC75) TV system: DVB COFDM 2K/8 K, Video playback: NTSC, PAL, SECAM ...
Multimedia Supported multimedia connections USB (FAT or DOS-formatted; Mass Storage Class compliant with 500mA only) SD card slot Supported audio/video files Multimedia file names must not exceed 128 characters. Supported audio/video files Multimedia file names must not exceed 128 characters. Supported DLNA-compliant media server software ...
Connectivity Rear (PFL66x6H and PFL66x6K) EXT 1 (RGB/CVBS): SCART EXT 2: Component video (Y Pb Pr), Audio (L/R) SERV.U: Service port AUDIO IN: DVI/VGA stereo 3.5-mm mini-jack SAT (DVB-S): Available on certain models only Rear (PFL66x6T) ...
Use your TV legend to note the weight of the TV without the stand. Use your TV legend to note the weight of the TV with stand. Use your TV legend to note the dimensions of your TV (with and without the stand).
Philips is committed to develop, produce and market products that cause no adverse health effects. Philips conﬁ rms that if its products are handled properly for their intended use, they are safe to use according to scientiﬁ c evidence...
Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products. EMC regulation • In order to maintain conformity to the Electro Magnetic Compatibility (EMC)
Info for UK only. Information about how to re-tune your TV during the digital TV switchover. Television in the UK is going digital, bringing us all more choice and new services. Starting in late 2007 and ending in 2012, television services in the UK will go completely digital, TV region by TV region.
Digital UK, the body leading the digital TV switchover, will advise you when you need to re-tune during the switchover. If you do not re-tune your channels when advised to do so by Digital UK, you may lose some or all of your channels until you do re-tune.
South: 1 800 7445477 North: 0 800 331 6015 Italia 800 088774 Numero Verde Қазақстан +7 727 250 66 17 local This information is correct at the time of print. For updated information, see www.philips.com/support. Latvia 80002794 local Lithuania 880030483 local Luxemburg/Luxembourg 080026550 Ortsgespräch/Appel local...