Table of Contents
Advertisement
Pins 3 and 4 are the relay, which can handle 2A @ 28VDC.
It is good for 100,000 cycles at maximum load, 100 million when
unloaded. The camera can close or open this relay to turn on lights
or other external devices. For example, you could unlock a door after
seeing who rang.
The relay is also rated for 0.5A @ 125VAC, however it should
never be used to directly control AC voltages from the wall outlet.
It will wear out rapidly and may result in sparking with risk of fire.
Switching mechanisms designed for controlling wall outlet power,
which can be triggered from a low DC voltage, are available.
Technical Support
Technical support for NetCam SC customers is available directly
from StarDot Technologies. Answers to most questions can be found
at our web site at http://www.stardot.com.
Technical Support and Software/Firmware Downloads
http://www.stardot.com
Technical Support via E-mail
help@stardot.com
Technical Support via Phone
(714) 228-9282, 8AM - 5PM PST, Monday-Friday
Page 50
NetCam SC MP Hybrid IP Camera
Advertisement
Table of Contents
