•
Automatic Gain Control (AGC)
amplified in low light conditions or in situations where the
exposure is limited to reduce motion blur. Enabling AGC may
introduce image noise.
•
AGC Limit - The higher the limit, the more digital amplification
occurs (assuming it's necessary). If you want to limit the digital
gain to reduce noise on the image, reduce this value.
•
Pixel Rep - Groups pixels together for better light sensitivity, at
the expense of image clarity.
•
DNR (Digital Noise Reduction) - Reduces image noise using
digital algorithms.
•
Image Speed - Determines when low light gain is initiated in
relation to the exposure.
•
Low Light - In low light conditions, the analog low light
mode of the image sensor is enabled. Enabling Low Light may
introduce image noise.
•
Alternate YUV - Uses non-standard algorithms to process
color, allowing for improved light sensitivity.
MISCELLANEOUS
Frame Skip
To lower the frame rate (and bandwidth), increase this value. A
value of 0 means full frame rate, a value of 1 means skip every other
frame, a value of 2 means skip every two frames (See also JPEG size
under the section for Processing).
NetCam SC MP Hybrid IP Camera
- The picture is digitally
Page 19