Table of Contents
Advertisement
Advanced Fields
Rotating Archive
If enabled, the camera will use a renaming scheme to store the last
10 images on your server. A hyphen, followed by the archive number
(0-9) is automatically appended to the end of the filenames.
Default: Off
Passive Mode
If NetCam SC is behind a proxy server, enable passive mode. If
you are unsure if you need passive mode, it is usually safe to enable
it anyway.
Default: On
Timeout
If the FTP transfer is unsuccessful, NetCam will abort and re-initiate
the process after the specified amount of seconds.
Default: 120
Delete Before Rename
NetCam SC employs a file renaming scheme, which greatly reduces
the possibility of file collisions between the camera uploading an im-
age and viewers downloading the image. The image is uploaded with
a .tmp extension. Once uploaded the tmp file is renamed without the
.tmp extension. Certain FTP/Web servers do not allow a file to be
renamed to a filename that already exists. To get around this problem,
enable Delete Before Rename.
Default: Off
IIS 4.0
Some FTP servers lock a file when a file with the same filename
is constantly uploaded and renamed. If you have problems seeing your
image update on your web site, try enabling the IIS 4.0 option. This
option is only valid if Delete Before Rename (above) is also enabled.
Default: Off
NetCam SC MP Hybrid IP Camera
Page 29
Advertisement
Table of Contents
