Switching The Notebook On For The First Time - Fujitsu Siemens Computers LIFEBOOK T Series Easy Manual

Switching the notebook on for the first time

When you switch your notebook on for the first time, the supplied software is installed and
!
configured. Due to the fact that this installation procedure must not be interrupted, you
should set aside enough time for it to be fully completed and connect the notebook to the
mains outlet using the mains adapter.
During installation, the notebook may only be rebooted when you are requested to do so!
► Press the Suspend/Resume button (1) to switch on the notebook.
► During installation, follow the instructions on screen.
Consult the operating system manual if anything is unclear about the requested input data.
On the "Drivers & Utilities" CD/DVD or on the Internet at: www.fujitsu-siemens.com/support
i
you will find further information about your system, as well as drivers, tools, updates,
manuals, etc.
If you want to use the pen, you will find further information in chapter "Using your
notebook", section "Use as a Tablet PC".
A26391-K220-Z122-1-7619, edition 1
Preparing the notebook for use
1
15