Adjusting The Image Size - Epson EB-X25 User Manual

Adjusting Projected Images
e
Using the [ ], [ ], [ ], and [ ] buttons on the remote control,
or the [ ], [ ], [ ], and [
w v a
on the control panel, correct the position of the corner.
When you press the [
displayed.
If the message "Cannot adjust any further." is displayed while
adjusting, you cannot adjust the shape any further in the direction
indicated by the gray triangle.
f
Repeat procedures 4 and 5 as needed to adjust any remaining
corners.
g
When you are done, press the [Esc] button to exit the correction
menu.
Because Keystone was changed to Quick Corner, the corner
selection screen shown in step 4 is displayed the next time you press
the [ ] or [ ] button on the control panel. Change Keystone to
w v
H/V-Keystone if you want to perform horizontal and vertical
correction using the [
Settings - Keystone - H/V-Keystone
s
] buttons (or the [Wide]/[Tele] buttons)
b
] button, the screen shown in step 4 is
] or [ ] button on the control panel.
w v
p.88
a
If the [Esc] button is held down for about two seconds while
the corner selection screen from step 4 is displayed, the
following screen is displayed.
Reset Quick Corner: Resets the result of Quick Corner
corrections.
Switch to H/V-Keystone: Switches the correction method to
H/V-Keystone.
s "Settings Menu"

Adjusting the Image Size

For EB-X25/EB-W22/EB-X22/EB-X21/EB-X20/EB-X17
Turn the zoom ring to adjust the size of the projected image.
For EB-S21/EB-S17
Adjust by using the [Wide]/[Tele] buttons on the control panel.
Wide: Enlarges the size of the projected image.
Tele: Reduces the size of the projected image.
p.88
44