Rear - Epson EB-X25 User Manual

Part Names and Functions

Rear

EB-X21/EB-S21/EB-X17/EB-S17
EB-X25/EB-W22/EB-X22/EB-X20
The ports vary depending on the model being used.
Name
A
Connects the power cord to the projector.
Power inlet
s "From Installation to Projection"
B
S-Video port For S-video signals from video sources.
C
RS-232C port When controlling the device from a computer, connect it
to the computer with an RS-232C cable. This port is for
control use and should not normally be used.
s "ESC/VP21 Commands"
D
Video port Inputs composite video signals from video sources.
E
Inputs audio from equipment connected to the S-Video
Audio-L/R port
port or the Video port.
F
Monitor Out port Outputs analog RGB signals input from the Computer1
port to an external monitor. You cannot output signals
input from other ports or component video signals.
G
Inputs audio from equipment connected to the
Audio1 port
Computer1 port.
H
Audio Output port Outputs audio from the currently projected image to an
external speaker.
I
Inputs audio from equipment connected to the
Audio2 port
Computer2 port.
J
Speaker Outputs audio.
K
Remote receiver Receives signals from the remote control.
L
Inputs video signals from HDMI compatible video
HDMI port
equipment and computers. This projector is compatible
with HDCP
s "Connecting Image Sources"
M
Inputs image signals from a computer and component
Computer2 port
video signals from other video sources.
N
Computer1 port
Function
p.34
p.73
g
.
p.26
13