Part Names and Functions
Name
C
Rear feet
When setup on a surface such as a desk, turn to extend and
retract to adjust the horizontal tilt.
s "Adjusting the Horizontal Tilt"
D
When setup on a surface such as a desk, extend the foot to
Front adjustable foot
adjust the position of the image.
s "Adjusting the Image Position"
Function
p.45
p.45
Control Panel
Name
A
Changes to the next input source that is sending an image.
[Source Search]
button
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)"
• When the Configuration menu or the Help screen is
B
[Enter] button
displayed, it accepts and enters the current selection and
[
]
moves to the next level.
• If pressed while projecting analog RGB signals from the
Computer port, you can automatically optimize
Tracking, Sync., and Position.
• Displays the Keystone screen allowing you to correct
C
[w][v] buttons
keystone distortion in vertical and horizontal
directions.
s "Correcting manually"
• If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s "Using the Configuration Menu"
s "Using the Help"
15
Function
p.35
p.41
p.82
p.103