D-Link AirPlus DWL-800AP+ Manual page 6

*By default, the DWL-800AP+ is set to Repeater mode. Just input the 12-
digit Ethernet MAC address (e.g., 0080CO2C5551) of the remote router or
access point that you wish to repeat. If you wish to use the DWL-800AP+ as
an access point, you can select this option instead. Go to the Wireless tab in
the Web Configuration Utility to make these selections.
Features & Benefits
•
Extends the range of your wireless network
•
Up to 2X Faster with AirPlus Products - high-speed wireless data
transfer rates up to 22Mbps. With twice the data rate and capacity,
the DWL-800AP+ delivers media rich content such as digital images,
videos, and MP3 files much faster than standard 802.11b networks
•
Fully 802.11b Compatible – Fully compatible with the IEEE 802.11b
standard and interoperable with all existing 802.11b compliant
devices
•
Stronger Network Security with 256-bit WEP Encryption – Supports
64/128/256-bit WEP encryption for higher level of security for your
data and wireless communication than encryption found in existing
802.11b products
•
Setup Wizard – for easy configuration.
•
Web-based interface for Managing and Configuring – Easy-to-use
interface independent of the operating system
•
2 Different Operation Modes – Capable of operating in Access Point
or Repeater mode. In Repeater mode the DWL-800AP+ will extend
your existing wireless network up to 328 feet when used with the
D-Link AirPlus DI-614+ Enhanced Wireless Router; the AirPlus
DI-714P+ Enhanced Wireless Router with Print Server; the AirPro
DI-764 Multimode Wireless Router, the AirPro DI-754 Multimode
Wireless Router with the DWL-650+, or the AirPremier
DWL-1000AP+ Enterprise Wireless Access Point
•
Auto-MDI/MDIX Ethernet port
6