Shooting Photos - Sony FDR-AX100 How To Use Manual

Shooting photos

Shoot photos.
1. Remove the lens cap.
2. Open the LCD monitor of this product to turn the power on. Press the
Mode) button to select the photo recording mode.
You can also select the photo recording mode by selecting [MODE] on the LCD
monitor.
You can also turn on this product by pressing POWER or by pulling out the viewfinder.
3. Press PHOTO lightly to adjust the focus, then press it fully.
When the focus is adjusted properly, the AE/AF lock indicator appears on the LCD
monitor.
Note
The following states will be indicated if data is still being written onto the recording media
after recording has finished. During this time, do not apply shock or vibration to this product,
or remove the battery pack or AC Adaptor.
Access lamp is lit or flashing
Capturing a photo from a movie (models with the USB IN/OUT jacks) or creating a photo
[23] How to Use Recording Changing the brightness manually for recording
/ (Shooting