Power Save - Sony FDR-AX100 How To Use Manual

Power Save

You can change the settings for the backlight of the LCD monitor and the power status of this
product.
1. - [Setup] - [
Descriptions of menu items
Standard (default setting):
The backlight of the LCD monitor turns dark automatically if you do not attempt to operate this
product for more than about 1 minute. This product turns off automatically if you do not attempt
to operate this product for more than about 2 minutes.
Max :
The brightness of the LCD monitor is adjusted to the surrounding brightness automatically. The
backlight of the LCD monitor turns dark automatically if you do not attempt to operate this
product for more than about 15 seconds. This product turns off automatically if you do not
attempt to operate this product for more than about 1 minute.
Off :
The backlight of the LCD monitor is always on brightly. This product does not turn off
automatically.
Note
This setting works only when using the battery pack.
[174] How to Use
Initialize
All the settings return to the default.
1. - [Setup] - [
Hint
Even if you use this function, all movies and photos are retained.
General Settings] - [Power Save].
Menu operations
General Settings] - [Initialize] -
Setup
.