Choosing The Input Signal; Using Stereo Direct - RCA Professional Series Owner's Manual

Expanded
This mode is especially designed to give
sound depth to stereo sources. The overall
effect builds a dynamic and broad sound
space, allowing two-channel (stereo) signals
to imitate a five speaker sound. Use with
Dolby Pro Logic for a stereo surround effect.
You can also use with Dolby Digital sources
for a wider stereo field than the Standard
modes.
5-Channel Stereo
This can be selected to give multi-channel
sound to a stereo source, using all the
speakers in your setup.
Choosing the Input
Signal
You need to connect a component to both
analog and digital inputs on the back of the
receiver to select between input signals.
OSR
STEREO SIGNAL
DIRECT SELECT MONITOR MIDNIGHT LOUDNESS TONE
MULTI JOG
Press
SIGNAL SELECT
to select the input signal
corresponding to the source
component.
Each press switches between
, and
5.1 ch ANALOG
is .
AUTO
R
MULTI JOG
ENTER
VOLUME
SET UP
DOWN
(front panel)
,
AUTO DVD
. The default
DIGITAL
When set to
DIGITAL
when a Dolby Digital signal is input, and
lights when a DTS signal is input.
DTS
Notes:
• DVD 5.1 ch is only available when
is selected as the source.
LD
• This receiver can only play back Dolby
Digital, PCM (32kHz, 44kHz, 48kHz,
and 96 kHz) and DTS digital signal
formats. With other digital signal
formats, set to
ANALOG
• You may get digital noise when a LD or
CD player compatible with DTS is
playing an analog signal. To prevent
noise, make the proper digital
connections (see "Connecting Digital
Components" on page 15) and set the
signal input to
DIGITAL
• Some DVD players do not output DTS
signals. For more details, refer to the
instruction manual supplied with your
DVD player.
• You can only select
you selected is assigned to a digital input.
See page 36 for more on the digital input
settings.

Using Stereo Direct

When you select
STEREO
will hear the source through just the front
left and right speakers (and possibly your
subwoofer depending on your speaker
settings). Dolby Digital and DTS
multichannel sources are downmixed to
stereo. See the previous page for more on
these modes.
Press (
STEREO STEREO DIRECT
the front panel) repeatedly to switch
between the two options.
Playing Sources
, 2 2 lights
2 DIGITAL 2 2
DVD/
.
.
if the source
DIGITAL
or , you
DIRECT
on
29