Using The Quick Setup - RCA Professional Series Owner's Manual

Using the Quick Setup

You can use the Quick Setup to get your
system up and running with just a few
button presses. The receiver automatically
makes the necessary settings after you have
selected your speaker setup and room size.
If you want to make more specific settings,
refer to "Choosing Your Receiver Setup" on
page 33. Use the front panel controls for the
steps below.
OSR
T LOUDNESS TONE SET UP
MULTI JOG
1 Press
POWER
on.
The indicator goes out.
STAND BY
2 Press .
SET UP
The display prompts you to select your
speaker setup.
3 Use the
MULTI JOG
your speaker setup.
Cycle between the following choices:
5.1ch
3.0ch
3.1ch
R
MULTI JOG
ENTER
VOLUME
DOWN
to turn the power
dial to choose
5.0ch
4.1ch
4.0ch
Note:
Check the table below to find the speaker
setup that corresponds with your system.
Front Center
Speakers Speaker
√
3.0 ch
√
3.1 ch
√
4.0 ch
√
4.1 ch
√
5.0 ch
√
5.1 ch
4 Press .
ENTER
The display prompts you to select your
room size.
5 Use the
MULTI JOG
your room size.
Depending on the distance of your
surround speakers, choose between
mall, edium, or
S M
below).
S
12 ft.
Front
10 ft.
Center
6 ft.
Surround
6 Press to confirm your
ENTER
setup.
The display shows the speaker setup and
room size that you have selected.
5 Minute Guide
Surround Sub
Speakers Woofer
√
√ √
√
√ √
√ √
√ √ √
dial to choose
arge (see table
L
M L
12 ft. 12 ft.
10 ft. 10 ft.
7 ft. 9 ft.
13