Download Print this page

Canon P114F Installation Manual

Stackable switch.
Hide thumbs

Advertisement

Avaya
Installation Guide
Avaya P114F
S
S
TACKABLE
WITCH

Advertisement

   Related Manuals for Canon P114F

   Summary of Contents for Canon P114F

  • Page 1

    Avaya Installation Guide Avaya P114F TACKABLE WITCH...

  • Page 3: Important Information

    Die Wartung darf NUR von qualifiziertem, technischem Personal durchgeführt werden. 2. NIEMALS ein beschädigtes Gerät einschalten, oder versuchen es zu bedienen. 3. Vergewissern Sie sich, dass die Chassis Ventilationsöffnungen des Gerätes NICHT BLOCKIERT sind. Cajun P114F Stackable Switch Installation Guide...

  • Page 4

    Stromzufuhr wo sich auch der Sicherungskasten befindet. 5. Bedienen Sie das Gerät NICHT an einer Stelle an der die Umgebungstemperatur 50ºC übersteigt. 6. Ziehen Sie das Netzkabel raus, BEVOR Sie versuchen die Hauptsicherung zu kontrollieren oder auszutauschen. P114F Stackable Switch Installation Guide...

  • Page 5

    P110 switches can be stacked, and up to 32,000 MAC addresses per stack are supported. All ports can run at full or half duplex. The P114F ports can use Avaya’s flow control mechanism to eliminate packet loss. An automatic fairness mechanism ensures that all ports gain fair access to the P110 Exoplane even at very high network utilization.

  • Page 7

    Chapter 2 Installation The procedure for getting the P114F up and running depends on whether the switch is to operate standalone or as part of a stack. First, attach the adhesive rubber feet to the base of the P110 switch. If the switch is to be rack mounted, do not attach the feet.

  • Page 8

    4. Place the P114F in the stack. The P110 NMA must be in the top switch of the stack. To ensure proper ventilation, ensure that all empty P110 NMA slots in the stack are closed.

  • Page 9

    • When using the P114T or P114F in the stack, make sure all switches in the stack are connected using P110 Exoplane cables with white connectors and marked C/S:B (part number 108362203). Extra cables can be ordered from your local Avaya representative.

  • Page 10: Rack Mounting

    3. Secure the switch in the rack using the screws. Use one screw on each side. Do not overtighten the screws to avoid damaging the plastic. 4. Connect the P110 Exoplane cables, as described above, and as illustrated in Figure 1. 5. Snap closed the hinged ends of the front panel. P114F Stackable Switch Installation Guide...

  • Page 11

    Chapter 2 Preliminary Settings Figure 2 P110 rack mounting arrangement P114F Stackable Switch Installation Guide...

  • Page 12

    Diagnostics Table 1 and Table 2 explain the meaning of the P114F Stackable Switch diagnostic LED indicators. Figure 3 The P114F Stackable Switch Front Panel LEDs and Buttons LNK COL FDX FC 100 M PWR NMA RED Table 1 Meaning of the P114F Stackable Switch Front Panel Buttons...

  • Page 13

    Chapter 2 Preliminary Settings Table 2 Meaning of the P114F Stackable Switch front panel LEDs LED Indicator Function Status Meaning Power Mains power not connected Mains power connected Blink Working on back-up power supply Agent No agent in switch Switch contains an active agent...

  • Page 14

    Chapter 2 © 2003 Avaya Inc. All rights reserved. All trademarks identified by the ® or TM are registered trademarks or trademarks, respectively, of Avaya Inc. All other trademarks are the property of their respective owners. Document number: 130006 Rev. A...

Comments to this Manuals

Symbols: 0
Latest comments: