Kenwood KVT-512 Instruction Manual page 72

Setup Menu
Security Code Setup
II
Register your security code
o
Display the Security Code Setup screen
~
~
Now, your security code is registered.
If you press the Reset button or if you
disconnect your receiver from the battery after
the code registration, you need to enter the
registered security code.
D
Reenter the security code
Reenter the same security code as that you
have entered in Step 3 for confirmation.
~
• If you enter a different security code, the screen returns
to Step 3 (for the first code entry).
D
Register the security code again
in the "Setup Securlly SeluP
Touch
Menu" screen (page 58).
ITJ
Displays the Security code input screen.
rn
Turns the SI function on or off.
If turned "ON", the burglar alarm lamp
flashes when the vehicle ignition is off.
(12l
"ON")
o
Start Security Code setup
• When the Security Code function is activated, the code
cannot be changed and the function cannot be released.
Note the Security Code can be set as the 4 digit number
of your choice.
You can set a security code to protect your
receiver system against theft.
~
~
. ::'@a2re
already completed the code registration,
. is displayed.
D
Enter a security Code
Input four-digit number.
72
'9
KVT-512/KVT-532DVD