Kenwood KVT-512 Instruction Manual page 28

• For the basic method of receiver button operations, see <Basic Operations> (page 10).
• Set the remote controller mode switch to "AUD" mode before starting operation, see <Remote Controller mode switch>
(page 88).
Functions While Displaying the Control
Screen
Switches to the source control screen to use
various functions.
[TUNER] button on the "Source Select" screen
OJ
Band display
[I]
Preset number
[l]
Frequency display
28 KVT-S12/KVT-S32DVD
II]
Radio station information display.
Selects the Program Service Name, Title
&
Artist name, Station Name, Category Name
1/2, or Radio Text.
[]] Switches to the FM 1/2/3 band.
[§] Switches to the AM band.
[I]
Tunes in a station.
Use the <Seek Mode> (page 29) to change
the frequency switching.
[]] Switches the button display.
[[] Turns the CRSC function On or Off. (Only
when receiving the FM broadcast)
UQ]
Selects the Auto Memory mode.
(See page 30 for the <Auto Memory»
[TI
Switches the Seek mode.
(See page 29 for the <Seek Mode»
[J1]
Switches the number of lines displayed in
the Information Display.
[}] Turns the Traffic Information function On or
Off.
See <Traffic Information> (page 32).
[11]
When" to . . buttons appear, you
can recall the stations on memory.
For memory of broadcasting stations, see
<Auto Memory> (page 30) or <Manual
Memory> (page 30).
[ffi]
Sets a name to the station. See <Set Station
Name> (page 31).
[1]]
Searches station by program type. See
<Search for Program Type> (page 32).
[ZJ
Lists and selects memorized station.
[lID
Displays Radio Text screen. See <Radio
Text> (page 31).