Ref Nr: 11 (Applies To All Treadmill Models) - Star Trac Treadmills Housekeeping & Maintenance

Ref Nr: 11 (Applies to All Treadmill Models)

ELEVATION SCREWS - LUBRICATION
Recommended:
Average Time:
TOOLS
• #2 Phillips screwdriver (to remove shroud)
• Clean rag
• Lubricant (Silicone or Teflon based – Do not use WD40)
PREPARATION
• Remove front shroud
Step 1: Clean Screw Thread and lubricate with Silicone or Teflon
Step 2: Elevate Treadmill to the high position and lower it back down.
Step 3: Replace Shroud.
Prentive Maintenance - Treadmills
Bi-Annually (Every 6 months)
3 minutes
Clean and Lubricate
21 Doc: 635-4075 Rev: A