Vertex Standard VXR-9000 Series Specifications page 3

Reliable in operation, and flexible in setup options, the VXR-9000 is a high-tech 50 W/100 W*
FM Repeater designed for advanced commercial applications. Its slim-line design is
crafted for easy installation in a standard 19-inch rack mount, and all programming
parameters may be accomplished by the Dealer in minutes using a personal computer
and Vertex Standard's Programming Software.
D-SUB 25-PIN ACCESSORY CONNECTOR ON REAR PANEL
For convenient interfacing to external controllers or other
accessories, the rear-panel DSUB 25-Pin Accessory Jack
provides access to important repeater circuitry without the need
for a specialized connector.
PROGRAMMABLE MESSAGE BANKS
Enter date, subject, and notes such as programming or
service memos, for recall at any time in the future.
SECURITY
SELECTABLE ENCRYPTION OPTIONS
The VXR-9000 may be set up for either rolling code or
inversion-type encryption (optional module required). The
security required by your customer is available for easy
installation.
FIVE-STEP AUTOMATIC COMMAND SEQUENCE
During certain operating events (such as Startup, switch
from main DC to backup DC, etc.) the VXR-9000 may be
programmed to undertake an automatic sequence of
commands, so it can be configured for the particular event.
For example, if DC fails and the repeater switches to
emergency DC, the repeater can be set up to switch to
Low Power, send a CW ID advising of the DC power
situation, and other auto-command sequences, as well.
TWO-TONE DECODE STARTUP
The VXR-9000 may be booted up using two-tone commands.
Four popular two-tone formats are supported, and the
precise frequencies of each of the two tones may be
manually adjusted from 100 Hz to 5 kHz, in 0.1 Hz steps.
*100 W w/optional VPA-9000H
Photo is built in Power Supply Unit (Option)