Video Output Configuration For Mxf Mode - Canon EOS C500 PL Instruction Manual

Video Output Configuration for MXF Mode

Refer to the following table for the video output configuration from each terminal during recording and playback.
Operating modes:
Video configuration
Resolution Frame rate
(
59.94i
29.97P
23.98P
1920×1080
1440×1080
50.00i
25.00P
24.00P
59.94P
29.97P
23.98P
1280×720
50.00P
25.00P
24.00P
1
Depending on the signal, you can switch between the P and PsF setting (A 145) for output.
2
Set [¢ Video Setup] (in
or [Off].
3
You can display zebra patterns on an external monitor during HD output (A 83). Zebra patterns will not be output during SD
output.
4
When the camera is connected via HDMI OUT terminal to an external monitor, the video signal output from the HD/SD SDI
terminal will be the same as that from the HDMI OUT terminal.
5
Video output will automatically switch to HD or SD, depending on the capability of the external monitor.
6
Set [¢ Video Setup] (in
component video, luminance signal) or [Composite] (SD analog composite signal).
HD/SD SDI
2, 3, 4
terminal
1
HD HD
mode) ( mode)
1080/59.94i
1080/29.97
(P/PsF) 1080/59.94i
1080/23.98
(P/PsF)
1080/50.00i
1080/50.00i
1080/25.00
(P/PsF)
1080/24.00
1080/60.00i
(P/PsF)
720/59.94P
720/29.97P 720/59.94P
720/23.98P
720/50.00P
720/50.00P
720/25.00P
720/24.00P 720/60.00P
mode) or [ 4K/2K/MXF Setup] (in
mode) or [ 4K/2K/MXF Setup] (in
HDMI OUT
3, 5
terminal
SD HD
480/59.94i 1080/59.94i 480/59.94P
576/50.00i 1080/50.00i 576/50.00P
– 1080/60.00i
480/59.94i 720/59.94P 480/59.94P
576/50.00i 720/50.00P 576/50.00P
– 720/60.00P
mode) > [HD/SD SDI] > [Output] to [HD], [SD]
mode) > [SYNC OUT] > [Output] to [HD-Y] (HD
Video Output Configuration
SYNC OUT
6
terminal
SD HD SD
1080/59.94i 480/59.94i
1080/50.00i 576/50.00i
– 1080/60.00i –
720/59.94P 480/59.94i
720/50.00P 576/50.00i
– 720/60.00P –
141