Push And Hold Macros - Universal Remote Control MX950 Programming Manual

30

Push and Hold Macros

U
By selecting this option, you now have the ability for one button to issue two different macros. One macro is
S
issued if the button is pressed briefly, another completely different macro is issued if the button is pressed and
held. Here is a way to use Push and Hold macros that we think you might find useful for power user clients.
I
Power users constantly switch devices and make adjustments to different components so waiting for the
N
Activity macros to finish reconfiguring their system can be frustrating to them. By programming each of their
G
activity macros to only issue when they press and hold the button for two seconds, you can program each but-
ton to simply Jump to the device when they tap the button.
M Here's:
X
1 Select the button you'd like to program with two different macros.
9
2 S elect Press-Hold Mode from the Type list box at the bottom of the Macro Window. Then, set the
5
TIME in the Options window to 2 seconds. This ensures that the client will have to Press and Hold
the button two seconds to issue the Macro.
0
E
3 Click on the Tab at the bottom of the Macro Window labeled BEFORE, then program a jump to the
D
device only.
I
T
O
R
T
O
P
R
O
G
R
A
M When the client presses the button for less than 2 seconds, only the jump occurs.
Type in Section Title Macro Programming