Horizon Fitness T93 User Manual page 7

AS SE MB LY ST EP 
HARDWARE BAG  CONTENTS :
CONSOLE MAST
A Open HARDWARE BAG .
B Align SUPPORT BAR with holes in CONSOLE MASTS.
C Insert BOLTS (L) into all 4 holes of the SUPPORT BAR.
NOTE: Look into holes in the right mast before inserting bolts to avoid pinching cables.
D Tighten all console bolts (Step 3) and support bar bolts (Step 4) completely.
12
T93_Rev.1.5.indd 12-13
BOLT (L)
15 mm
Qty: 4
SUPPORT BAR
BOLT (L)
ASSEMBLY STEP 
HARDWARE BAG  CONTENTS :
BOLT (M)
120 mm
Qty: 4
BOLT (M)
ARC WASHER (K)
CONSOLE MAST
HANDLEBARS
A Open HARDWARE BAG .
B Attach LEFT HANDLEBAR to CONSOLE MAST using 2 BOLTS (M) and 2 ARC WASHERS (K).
NOTE: Look into holes before inserting bolt to prevent cables from
being damaged.
C Repeat on other side.
ARC WASHER (K)
17 mm
Qty: 4
13
6/20/08 2:05:23 PM