SP8600HD3D/IN8601 User's Manual
Pull firmly on the module
6.
handle to remove the lamp
module.
Reverse steps 1 to 6 to in-
7.
stall the new lamp module.
While installing, align the
lamp module with the
connector and ensure it is
level to avoid damage.
Note: The lamp module
must sit securely in place
and the lamp connector
must be connected properly
before tightening the
screws.
Turn on the projector and reset the lamp after the lamp module is replaced.
8.
Lamp Reset:
a) Press the Menu button and select the SETUP>>Advanced menu.
b) Highlight "Lamp" and press the Enter/Select button to access the Lamp submenu.
c) Select "Reset Lamp Timer" and press Enter/Select.
d) Highlight "Reset" (it will appear blue) and press Enter/Select to reset the lamp counter
to zero.
— 30 —