Canon imageRUNNER 1750i User Manual page 58

NOTE
Even if you press [DHCP], [BOOTP], or [RARP], you should enter an IP address,
subnet mask, and gateway address. If this information cannot be obtained from
the DHCP, BOOTP, or RARP server, the settings entered in this step are used.
7
8
NOTE
After restarting the machine, you might want to check if the IP address is correctly set
to the machine. For help, see "Checking the Machine's IP Address," on p. 6-4.
Press [OK] to finish the initial
setup.
From the next time the machine's main
power is turned ON, the Setup Guide does
not appear.
If you want to return to the previous screen,
press [Back].
Press [Yes] to restart the
machine.
If the IP address settings have been
specified, restart the machine to make the
settings effective. Press [No] if you want to
manually restart the machine later. (See
"Restarting the Machine," on p. 5-12.)
Turning ON/OFF the Machine
2
2-21