Canon imageRUNNER 1750i User Manual page 57

2
6
● To use a fixed IP address:
❑
❑
❑
● To automatically assign an IP address using DHCP, RARP or BOOTP:
❑
❑
2-20
Turning ON/OFF the Machine
Press [IP Address].
Enter the IP address using
Specify the [Subnet Mask] and [Gateway Address] settings in the same way.
Press [DHCP], [RAPP], or [BOOTP].
Enter the IP address, subnet mask, and gateway address.
❑
Enter the unit name (up to 24 characters)
using the on-screen keyboard ➞ press
[Next].
Press [Entry Mode] to select the desired
entry mode (<Alphabet> or <Others>).
If you want to configure the setting later,
leave the box blank and press [Next].
NOTE
For instructions on how to enter
characters, see Chapter 2, "Basic
Operations," in the Reference Guide.
❑
Select the type of telephone line ➞ press
[Next].
If you do not know the telephone line
type, contact your telephone service
provider for details.
Specify the IP address settings
➞ press [Next].
If you want to configure the settings later,
leave the boxes blank and press [Next].
- (numeric keys).