Cisco UCS B200 M3 Installation And Service Note page 14

Secure Digital (SD) Card Access
S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m
Figure 5
Step 2 Open the ejector lever in the front of the blade server.
Step 3 Gently slide the blade into the opening until you cannot push it any farther.
Step 4 Press the ejector lever so that it catches the edge of the chassis and presses the blade server all the way in.
Tighten the captive screw on the front of the blade to no more than 3 in-lbs. Tightening with bare fingers
Step 5
only is unlikely to lead to stripped or damaged captive screws.
Step 6 Power on the server. UCS Manager automatically reacknowledges, reassociates, and recommissions the
server, provided any hardware changes are allowed by the service profile.
Figure 5
upper slots of the chassis.
Secure Digital (SD) Card Access
SD card slots are provided for future usage. Their use is not supported at product release. They will
require a future software update to be used.
Cisco UCS B200 M3 Blade Server Installation and Service Note
14
Positioning a Blade Server in the Chassis
shows the positioning of a blade server in the chassis. Blade servers reside within the eight
OL-26624-01