Telephone Controls; Using The Telephone - Ford Fiesta 2010 Owner's Handbook Manual

After start up access to the phonebook
list can be delayed for several minutes,
depending upon the size.
Phonebook categories
The category is indicated as an icon:
Phone
E87990
Mobile
E87991
Home
E87992
Office
E87993
Making a phone an active
phone
Note: If there is an ongoing call when the
phone in use is selected as the new active
phone, the call is transferred to the vehicle
audio system.
When using the system for the first time,
no phone is connected to the system.
After switching on the ignition and the
audio unit, the Bluetooth phone must be
bonded to the system. See Bluetooth
setup (page 178).
After bonding a Bluetooth phone to the
system, this becomes the active phone.
For further information refer to the phone
menu.
Select the phone from the active phone
menu.
Turning the ignition and radio back on
again, the last active phone is picked up
by the system.
Note: In some cases the Bluetooth
connection must also be confirmed on
the phone.
Telephone
Bond another Bluetooth phone
Bond a new Bluetooth phone as
described in the requirements for a
Bluetooth connection.
Phones stored in the system are
accessible by using the phone list on the
audio unit.
Note: A maximum of six devices may be
bonded. If six Bluetooth devices have
already been bonded, one of these has
to be debonded in order to bond a new
device.

TELEPHONE CONTROLS

Remote control
Voice and mode button
E102756
Incoming calls can be accepted by
pressing the MODE button once. Press
the button again to end the call.

USING THE TELEPHONE

Note: Refer to your audio guide for
details of the controls. See Audio unit
overview (page 160).
Note: You can exit the phone menu by
pressing any source button CD, RADIO
or AUX.
179